Inverted Metric Adapter-Adapter Standard to Metric Bubble

Brass Inverted Metric Adapter

Description:

A brass inverted flare adapter standard to metric bubble is a type of fitting that connects a component with a standard inverted flare end to a component with a metric bubble flare end.

This particular adapter is also designed to be used with a dual master cylinder setup, which allows separate control of the front and rear brakes on a vehicle.

If you have any questions about the inverted flare angle fittings, feel free to ask.

Features and Benefits:

• Low cost
• Reusable
• Vibration resistant
• Strong seal

Description

Part #	Female Inv. Flare Seat	Male Metric Bubble Flare	A	Hex	Ref #	Approx. Wt. Lbs.
12-336	3/16” (3/8-24)	11×1.5			7973
12-337	3/16” (3/8-24)	(3/16”) (10×1.25)	1.00	0.50	7970	0.02
12-339	3/16” (3/8-24)	13×1.5	1.03	0.56	7972	0.04
12-341	3/16” (3/8-24)	12×1.0	1.02	0.53	7974	0.04

Inverted Metric Adapter-Adapter Standard to Metric Bubble Video

This video shows information about inverted flare brass inverted metric adapter- standard to metric bubble adapter.

We can offer different sizes and types of the brass standard to metric bubble adapter, such as 1/2, 1/4, 3/8, etc. These adapters play an essential role in the fuel line, brake line, and natural gas systems.

If you have any questions about inverted flare fittings, please contact us.